The 10CG: pro-level features at a sport-system price.
The 10CG is perfect for the price-conscious pilot — an integrated, 2.4GHz treasure trove of features formerly found only on the most advanced Futaba systems.
But it’s also a system that boasts advantages few others can claim: 7-point throttle and pitch curves; 4 heli flight modes; a round dozen factory-defined glider mixes; graphics for programming swash plate types; swash ring; and logic switches that allow you to activate a timer or other function just by changing the positions of specific sticks or switches.
Video
10CG System Overview:
- Dial ‘n Key™ programming w/joystick
- Airplane, heli and glider software
- 2048 resolution
- Real-Time Response™
- Smart Switch Technology™
- Basic & advanced menus
- 15-model memory, expandable to 48 models*
- 10-character model & user naming
- Assignable switches & dials/functions
- Model select, copy, re-set
- Data transfer
- 2 proportional slider switches
- Fail-safe, sub-trims, servo reversing & EPA
- Digital trims & trim step, expo & dual/triple rates
- 160 x 72 backlit LCD w/adjustable contrast
- Servo monitor display
- Auxiliary channel screen for 1-step function/switch assignment
- Model & system timers
- Full functionality trainer system (cord required)
- Throttle cut, hold & idle down
- Mode 1-4 selectable
- Sticks w/length and tension adjustments
* Requires optional 128K CAMPac Module (FUTM9408)
Airplane Features
- 8 programmable mixes
- Elevator/Flap
- Throttle needle
- Aileron differential
- Flaperons
- V-tail
- Elevon
- Air brake w/elevator delay
- Ailevator
- 4-position snap roll switch
- 2 independent gyro settings
- 7-point throttle curve
- Flap trim
|
|
Heli Features
- 6 programmable mixes
- Hover/pitch
- Hover throttle
- 8 swash plate types w/graphics
- Swash AFR
- 5-point revo mixing
- Gyro menu
- 7-point throttle & pitch curves w/delay
- High/low pitch setting
- Swash ring
- Throttle hold & 3 idle-ups w/delay
Glider Features
- 8 programmable mixes
- Butterfly/elevator (2)
- Elevator/flap
- Chamber mix
- Aileron/flap
- Aileron/rudder
- Flaperons
- V-tail
- 4-point offset
- Spoiler mix
- Single/dual flap servos
- 5 flight conditions
- 3 wing types
- Adjustable motor cut
|
 R6014FS Receiver
- True, 14-channel design.
- Designed specifically for FASST™ 2.4GHz systems.
- Push-button Easy-Link™ feature locks receiver to the transmitter’s unique signal.
- Includes battery fail-safe with auto cut-off and setup LED.
| Stock # |
System |
Modulation |
Band |
Receiver |
Rx Battery |
Tx Battery |
Mode |
| FUTK9255 |
10CGA (airplane) |
FASST |
2.4GHz |
R6014HS |
NR4J 600mAh NiCd |
NT8S700B 700mAh NiCd |
2 |
| FUTK9256 |
10CGH (helicopter) |
FASST |
2.4GHz |
R6014HS |
NR4RB 1000mAh NiCd |
NT8S700B 700mAh NiCd |
2 |
| FUTK9257 |
10CGA (airplane) |
FASST |
2.4GHz |
R6014HS |
NR4J 600mAh NiCd |
NT8S700B 700mAh NiCd |
1 |
| FUTK9258 |
10CGH (helicopter) |
FASST |
2.4GHz |
R6014HS |
NR4RB 1000mAh NiCd |
NT8S700B 700mAh NiCd |
1 |
|
