10-Channel 2.4GHz Computer System

The 2.4GHz system that offers the impossible: Pro-level features at a sport-system price.

Some people feel that a 2.4GHz system with a built-in module will always offer better response than a modular system. Nothing could be further from the truth.

The 10C is a modular system, yet offers response superior to most “dedicated” systems. Why? Because response doesn’t depend on whether your module is built-in or modular. It depends on whether your signal starts in analog or digital form.

Converting a signal from analog to digital form requires processing time — what you experience as lag. The 10C, on the other hand, was designed with a totally digital data stream. The signal starts digital and stays digital. Since no additional processing is needed, there’s no lag, either — just virtually instantaneous, real-time response.

And because the 10C is modular, you can use the TM-10 module to fly 2.4GHz-equipped aircraft…or replace it with a 50 or 72MHz module, and fly existing models without added equipment or expense.

Seeing is believing...and there’s a lot to see on the 10C!

Enhanced Swash Plate Screens

Enhanced Swash Plate Screens
The advanced heli menu offers you 8 swash plate options and a separate programming screen for each one. New graphics provide an easy way to link on-screen text with on-heli features.

Switch or Stick Timer Activation

With the 10C, the timer can be on or off, count up or down and activated from the switch or stick that’s most convenient for you. Another screen shows you total service hours for the 10C and the model you’re flying.

7-Point Throttle Curves

Instead of the 5-point curves found on most sport systems, the 10C features the 7-point curves found on high-end competition systems. Heli software offers a matching 7-point curve for pitch adjustments.

Simple, One-Screen Setup for Switches & Functions

Bring up the Auxiliary Channel screen, and you have a fast, easy way to eliminate unnecessary functions — or to assign the functions you want to the switches you prefer.

Smart Switch Technology™ (SST) : Flexible Setup, Automatic Ease

Logic Switches allow you to cause a function to be activated based on the position of two different switches or a stick and a switch position (depends on function to be activated). This can be set to activate on the stick/switch position “and” another switch; or the stick/switch position “or” another switch position. For example – to activate airbrakes on a model, you want the brakes to only be active when the throttle is below 25% and only when you are landing. You need control of the throttle without airbrakes the rest of the time. SST allows you to set up an arming switch, so by turning the arming switch on the airbrakes deploy when your throttle goes below 25%, turning the arming switch off gives you normal throttle control the rest of the time without airbrakes. Up to three different Logic Switches may be set.

Simplifying Sailplane Setup

Selecting sailplane type automatically brings up a setup screen and graphics that identify the control surfaces involved. Assigning control surfaces to specific channels has never been easier.

Constant Trim, Voltage, Timer & Name Display

The 160 x 72 LCD provides room for a huge amount of information on the opening screen: 10-character aircraft name; two flight timers; operating hours for the model and transmitter; bar graphs of all four trim settings; a 10-character user name; a graphic showing model type; battery voltage; and modulation.

Programming for Sailplane Events

The Condition Select screen lets you program before the event and concentrate on flying while you compete. You can enter settings for up to four conditions and activate any one with the flip of a switch.

R6014FS Receiver

• True, 14-channel design.
  
• Designed specifically for FASST™ 2.4GHz systems.
  
• Push-button Easy-Link™ feature locks receiver to the transmitter’s unique signal.
  
• Includes battery fail-safe with auto cut-off and setup LED.