      |
Radio System FAQ How do I set up a heading hold gyro in a heli model? How about acro/glider models? Heli: To adjust gyro gain, set up the gyro function. Open the advanced menu (press mode key) and select GYRO SENSE. Make it active. Set your Heading hold percentage. (Toggle down to Rate Up and then dial until desired percent. We start at approximately 80%,—set your own desired percentage based on your setup. This setting will go from 0-100%. (Remember on a heading hold/AVCS gyro, one side of the ATV (0-50) is standard mode; the other half (51-100) is AVCS mode. 50 is null or no gyro response whatsoever. Toggle down and set the normal mode percentage. We usually start at about 30%. Set the desired switch. (Cursor Down and turn Dial to desired switch.) For Glider/Acro models: Since these model types do not have gyro programming, use the EPA settings to adjust your heading hold and normal mode settings, and the Aux-Channel assignment to change switch assignment, if desired. |
Copyright © 2008 Hobbico, Inc. Terms of Use | Privacy Statement |